Language
- English
- 中文版

Maintenance and Installation of Filling Machines

Release time:

2019-10-16

1. The dimensions of pull-top bottles, bottle pads, and bottle caps must be standardized. 2. Before starting the machine, the hand crank must be used to manually rotate the equipment and check for any abnormal movement; only after confirming that everything is operating normally may the machine be started. 3. When adjusting the machine, appropriate tools must be used; it is strictly forbidden to use oversized tools or apply excessive force when disassembling parts, as this could damage components or impair machine performance. 4. After each adjustment, all loosened screws must be tightened securely. The machine should then be rotated using the hand crank to verify that its operation meets specifications before it can be started. 5. The machine must be kept clean at all times; oil stains, pharmaceutical solutions, liquids, or glass fragments are strictly prohibited on the machine to prevent corrosion and damage. To ensure cleanliness: (1) During production, any spilled pharmaceutical solution or glass debris must be promptly removed. (2) Before handing over shifts, all surfaces of the machine must be thoroughly cleaned, and clean lubricant must be applied to all moving parts. (3) A thorough weekly cleaning is required, with particular attention paid to areas that are difficult to clean during normal operation—these should be scrubbed thoroughly or blown clean with compressed air.

1. Standardized dimensions for pull-top bottles, bottle mats, and bottle caps

2. Before starting the machine, you must first use the hand crank to rotate it and check for any abnormality in its operation. Only after confirming that everything is normal may the machine be started. transport Action

3. When adjusting the machine, use appropriate tools; it is strictly prohibited to use oversized tools or apply excessive force when disassembling parts, as this may damage components or impair machine performance.

4. After each machine adjustment, be sure to tighten any loosened screws, then manually turn the machine using the hand crank to verify that its operation meets the required specifications before powering it on and running it. Action

5. The machine must be kept clean at all times. It is strictly prohibited to allow oil stains, chemical solutions, liquids, or glass fragments on the machine, as these can cause damage; therefore, the following measures must be taken:

⑴ During the production process, promptly remove pharmaceutical solutions or glass fragments from the machinery.

(2) Before shift handover, all surfaces of the machine must be cleaned, and clean lubricant must be applied to all moving parts.

⑶ Perform a thorough cleaning once a week, paying particular attention to areas that are typically difficult to clean during routine use—wipe them down or blow them clean with compressed air.

Keyword:

Maintenance and Care of Sealing Machines

Market Development Trends in Automated Filling Equipment

Maintenance and Care of Sealing Machines

Market Development Trends in Automated Filling Equipment

Shantou Daneng Light Industry Machinery Co., Ltd.

Address: No. 1, Building C, Yuehua Industrial Zone, Chaoshan Road, Jinping District, Shantou City, Guangdong Province, China

Telephone (Tel):+86-754-88114519,+86-75488104519

Fax: +86-754-88114501

Email:daneng168@vip.163.com

Scan to follow us

WeChat Official Account

Specialized, Refined, Distinctive, and Innovative

Our company is certified under the ISO 9001 quality management system, holds EU CE certification, and has been recognized as a specialized, refined, distinctive, and innovative small and medium-sized enterprise.
Our company is a national high-tech enterprise, and all of our independently developed products are patented. Counterfeiting will be prosecuted!

Website Construction:China Enterprise Dynamics Shantou | Search Engine Optimization Tags

Business License